← AI takeoff software
Underground Utilities takeoff software

Underground Utility Takeoff Software for Water, Sewer and Storm

Measure pipe and count structures from the utility sheets. Use the profiles, details and specs to check what goes in the trench before you price it.

Start free · No card required · Works from the PDF plan set you already have

Takeoff Tools

What goes into an underground utility takeoff

Water

Measure mains and services in LF by size and material. Count valves, hydrants, fittings and tie-ins from the plans and details.

Sanitary sewer

Measure each run between structures and note service laterals. Check manhole IDs, rim and invert elevations, and depth breaks against the profile.

Storm

Separate runs by diameter, material and structure-to-structure limits. Count inlets, manholes and outlets against the drainage schedule.

Trench and restoration

Carry bedding, backfill and pavement restoration as their own quantities. Flag crossings, rock, shoring and dewatering for pricing review.

Start with the plan and profile

Calibrate each sheet, then measure the plan runs in Takeoff Studio. Use profile or station lengths where the bid calls for them. Check the detail for trench width, bedding depth, backfill and any special crossing treatment.

Build up the takeoff by system. Keep pipe, structures and trench quantities separate so you can apply the right units and costs. Flag missing invert elevations or a tie-in that conflicts with the drawings before assuming a depth.

Carry the utility scope into the civil estimate

Use the marked lengths and counts to build budget lines from your cost catalog. Keep trench excavation and site grading separate, then reconcile the limits with the earthwork takeoff so you don’t carry the same excavation twice.

Why Foreman AI

The AI reads the set. You keep control of the number.

Every sheet and spec, read on upload

Architectural, structural, civil, MEP, and the project manual — processed in minutes, answerable in plain English with sheet citations.

Verified, auditable measurements

Quantities live on calibrated sheets as named objects you can see and correct — not black-box totals from a chat window.

Conflicts flagged before they cost you

Cross-discipline analysis surfaces the places the drawings disagree — the stuff that becomes RFIs and change orders.

Quantities straight into pricing

Takeoff objects flow into the budget builder, priced from your cost catalog, company history, AI market estimates, or web pricing.

FAQ

Underground Utilities takeoff questions

What sheets do I need for a utility takeoff?

Upload utility plans, profiles, typical trench details and relevant specifications. Include the structure schedule and bid form when available.

How should I measure pipe length?

Follow the bid’s measurement rule. Some items use center-to-center lengths and others use the net length between structure faces. Separate changes in diameter or material.

How do I take off trench excavation?

Use a run length, a trench width from the detail and a depth from the profile or approved assumption. Split runs where the depth or section changes and check the bid’s treatment of bedding, pipe displacement and backfill.

Run your next underground utilities takeoff with the AI.

Upload the plan set, ask it anything, measure what matters. Start free, no card required; the AI runs on credits.